黃埔大橋二標段工程質量計劃.doc
進入下載頁
工程質量計劃
標段全長693.607 m。分為地面道路、排水與高架橋三部分。高架橋為獨柱或雙柱單幅橋,
橋長為693.607m;地面道路為道路改造工程,即梅東路~空軍醫院區段拓寬至50m,沙
河涌橋亦相應擴寬;排水工程包括雨水管和污水管。
一、質量方針
精心施工、高效優質,拓寬技術、保持優勢,竭誠服務、顧客滿意
二、質量計劃范圍
本質量計劃僅適用于內環路放射線黃埔大道二標段工程。
三、工程項目質量目標
推行全面質量管理,工程一次成優,創優良樣板工程。工程質量達到:
1、分項工程合格率100%,優良率95%;
2、單位工程竣工質量優良;
3、創無質量通病工程,杜絕重大質量事故。
四、質量控制原則
1、堅持“百年大計,質量第一”的原則。
2、以人為本,把人作為控制的動力,調動人的積極性、創造性,增強空的責任感,樹
立“質量第一”觀念,提高人的素質,避免人的失誤,以人的工作質量保證工序質量和
工程質量。
3、預防為主:把對質量的事后檢查,轉為對質量的事前控制,把對工程產品質量的檢
查,轉為對工作質量的檢查,對工程產品質量的檢查和對中間Project Quality Plan
Tenders full 693.607 m. Into the road surface, drainage and the viaduct of three parts. Viaduct as a single column or double-column single frame bridge
Bridge length of 693.607m; surface roads for the road reconstruction project, that section of Plum Road ~ Air Force Hospital expand to 50m, sand
Rivers Bridge widening accordingly; drainage works, including rainwater and sewage pipes.
First, the quality policy
Careful construction, high quality, broaden technology to maintain our edge, dedicated service, customer satisfaction
Second, the scope of quality plan
The quality program is only available within the loop radiation Huangpu Road 2 Lot project.
Third, the project quality objectives
Implementation of total quality management, project time into a good, creative model works fine. Quality of the project to:
1, sub-projects 100% pass rate, good rate of 95%;
2, unit completion of good quality;
3, no quality problems create works to prevent a major quality problems.
Fourth, the principle of quality control
1, adhere to the "hundred years, quality first" principle.
2 people-oriented, as the control of man power, and arouse people's enthusiasm and creativity, and enhance the sense of responsibility empty, tree
Establishment of "quality first" concept to improve the quality of people, to avoid human error, people's work quality and quality assurance processes
Project quality.
3, prevention: the post of quality inspection, to advance the quality control, to check on the quality of engineering products
Investigation, to check on the quality of work, engineering product quality inspection and intermediate
