廣州南沙開發區工程沉管灌注樁安全技術交底.doc

交底內容：
1．施工現場應按項目部規定的位置安放施工機械和堆放材料，各種材料按照規范要求堆放。
2.凡施工期間需要動火作業時，參加動火作業人員必須嚴格執行動火安全規定，在動火前做好“八不”，在動火中做好“四要”，在動火后做好“一清”工作。
3.應遵守項目部的安全守則、安全管理規定。
4.各種機械設備懸掛操作規程牌,施工前應檢查管節與樁冒聯接是否牢靠,樁尖分瓣是否靈活.所有機械與平臺應平穩。
5、各施工班組現場應設防火負責人，負責本班所在區域的防火工作，并要經常檢查、督促本班組人員做好防火工作。
6.進入施工現場，必須遵守文明施工安全勞動衛生規章制度。
7.進入施工現場，必須按規定正確穿戴，使用安全帽、安全帶、工作鞋等個人勞動防護用品，無關人員不得進入施工區域。
8.施工區域內不準赤腳、赤膊，不準穿拖鞋、高跟鞋，高處作業不準穿破底鞋和帶釘易滑鞋。
9.不準酒后施工、操作。
10.不準擅自損壞、拆除、移動安全防護裝置、警示牌、安全標志。
11.按規定正確使用安全“三寶”。
12.在工棚宿舍內不準使用電爐、電熱棒等非生產性電加熱器具。
13.在工棚宿舍內不準躺在床上吸煙，禁止亂扔煙頭、火種。
14.施工作業區及人行道與高壓電線等的距離要符合安全距離。
15.各種用電和照明線路由電工架設，采用TN-S系統三相五線制，并配備過載和漏電保護裝置。
16.所有施工人員均應掌握安全用電基本知識和所用設備性能，施工用電設備專人使用，用電人員各自保護好自用設備的負荷、地線和開關箱，發現問題及時找電工解決，嚴禁非使用人員擅自使用電氣設備，不用時切斷電源。
17.配電系統分級配電，配電箱、開關箱外觀完整、牢固、防雨防塵、外涂安全色（標），統一編號；其安裝形式、內設必須符合有關規定；箱內電器可靠、完好、選型、定值符合規定并標明用途。
17、各種樁機要有專人負責維修、保養，并經常對機械運行的關鍵部位進行檢查，預防機械故障及機械傷人。
18、樁機使用時操作員要密切注意機上的儀器、儀表、指針是否超出安全范圍，機體是否有異常振動及發出異響，出現問題及時停機處理，不得擅離職守、隱瞞不報。
19、小范圍內機械與機械、機械與人同時工作時應協調配合，相互保持安全距離。
Cards on the table contents:
1. Construction site should be placed in the location of the project provides for construction machinery and stacking materials, a variety of materials piling up in accordance with specifications.
2. Where the need for Hot Work during the construction period, participants must strictly enforce the Hot Work Hot Work safety requirements, well before the hot work "eight do not" do well in hot work in "four to", after the hot work make "a clear" work.
3. Shall comply with the safety of the Department of Code projects, safety regulations.
4. All kinds of machinery and equipment operating rules hanging signs should be checked before construction pipe section is connected with the pile to take strong, it flexibility in the split pile tip. All mechanical and platform should be stable.
5, the construction team on-site person in charge should be set fire, charge of the class where the region's fire prevention work, and to regularly inspect and supervise the team personnel in fire prevention.
6. Into the construction site, must comply with the labor hygiene and civilized construction safety regulations.
7. Into the construction site, must be required to wear the correct use of safety helmets, safety belts, work shoes and other personal protective equipment work, unrelated persons allowed to enter the work area.
8. Construction of the region are not allowed to bare feet, bare, not allowed to wear slippers, high heels, clogs and worn in high places are not allowed to bring nail slippery shoes.
9. Not allowed to drink the construction, operation.
10. No unauthorized damage, removal, mobile security guards, warning signs, safety signs.
11. In accordance with the provisions of the proper use of safety "Sambo."
12. Dormitory in the shed are not allowed to use the electric stove, electric rods and other non-production electric heating appliances.
13. In the shed are not allowed to lie on the bed dormitory smoking ban throw cigarette butts, fire.
14. The construction work areas and walkways and high-voltage wire, etc. to comply with a safe distance away.
15. All power and lighting circuits set up by the electrician, TN-S system using three-phase five-wire system, and equipped with overload and leakage protection device.
16. All construction personnel should be to master the basic knowledge and safety of electric equipment used in performance, construction hand power equipment use, electrical workers protect their own personal use equipment, load, ground and switch boxes, find an electrician to solve the problem in a timely manner, is strictly prohibited unauthorized use of non-use of personnel electrical equipment, turn off the power when not in use.
17. Distribution system classification and distribution, power distribution box, switch box looks full, strong, rain, dust, applied externally safe color (standard), uniform numbers; its installation form, equipped to meet the requirements; box Electric reliable, good, selection, value and indicate compliance purposes.
17, need all kinds of pile driver specifically responsible for repair, maintenance, and often the key parts of the machine running checks, to prevent mechanical failure and mechanical wounding.
18, pile driver operators use to monitor the plane's instruments, meters, indicators are beyond the safe range, the body is abnormal vibration and abnormal noise issue, stop dealing with problems in a timely manner, shall not be absent from duty, it hidden.
19, small-scale machinery and machinery, machinery and people at the same time work should be coordinated with each other to keep a safe distance.
 

前往下載