推土機操作人員安全技術交底.doc

交底內容：   1．啟動前檢查工作裝置、行走機構、各部分安全防護裝置、及電氣裝置等。
2．作業時挖掘機應保持水平位置，必須等機身停穩后再挖土，當鏟斗未離開工作面時，不得做回轉、行走等行動，回轉制動器，應使用回轉制動器，不得用離合器反轉制動。
3．裝車時，鏟斗盡量放底，不得碰撞汽車任何部位。
4．作業時，鏟斗升降不可過猛，下降時不得碰撞車架或履帶。
5．在作業或行走時，嚴禁靠近架空輸電線路。
6．操作人員離開駕駛室，無論時間長短。必須將鏟斗落地。
7．作業后挖掘機應停放在堅實、平坦、安全的地方。
Cards on the table: 1. Pre-inspection equipment, travel agencies, some security guards, and electrical devices.
2. Operation should be kept horizontal position when the excavator to be digging and other body after a parked, left the face when the bucket is not the time, do not turn, walking and other actions, turning brakes, turning brakes should be used, not to use anti-conversion clutch action.
3. Loading, the bucket as far as possible end up not impact any part of the car.
4. Operations, bucket lift not too drastic decline may not frame or track collision.
5. The job or walking, close to overhead transmission lines is strictly prohibited.
6. Operator left the cab, no matter the length of time. Must be bucket floor.
7. After the excavator operations should be parked in a solid, flat, safe place.
 

前往下載