江西省1709人防指揮所工程施工組織設計.doc

目    錄
1. 編制說明……………………………………………………………
1.1編制目的………………………………………………………
1.2編制依據………………………………………………………
2.工程概況……………………………………………………………
2.1工程簡介………………………………………………………
2.2工程特點………………………………………………………
3.項目管理目標及項目組織機構……………………………………
3.1項目管理目標…………………………………………………
3.2項目組織機構…………………………………………………
3.2.1項目部施工管理體制……………………………………
3.2.2項目管理機構……………………………………………
3.3安裝項目組人員組成………………………………………
4.施工準備……………………………………………………………
4.1施工總平面布置……………………………………………
4.1.1施工平面布置原則……………………………………
4.1.2施工用電.用水準備……………………………………
4.1.3施工平面布置說明……………………………………
4.2技術準備
4.2.1交接準備……………………………………
4.2.2技術準備……………………………………
4.3勞動力資源準備
4.4物資準備
4.4.1材料的準備
4.4.2構(配)件.制品的加工準備
4.5主要施工機械.測試工具配備
5.電氣工程施工方案
5.1電氣工程簡介
5.2施工流程
5.3低壓配電設備安裝工藝
5.3.1施工條件
5.3.2施工準備
5.3.3設備開箱檢查
5.3.4柜(盤就位安裝
5.5電纜橋架安裝工藝
5.6電纜敷設工藝
5.7明,暗配管工藝
5.7.1線管暗敷
5.7.2線管明敷
5.7.2.1施工程序
5.7.2.2明配管路的施工方法
5.8電氣照明燈具的安裝工藝
5.9配電管,插座,開關安裝工藝
5.9.1配電箱的安裝
5.9.2開關,插座安裝.
5.10電氣試驗和試運轉
5.10.1一般要求
5.10.2低壓配電盤柜及低壓電氣器
6中央空調工程施工方案及技術要求
6.1中央空調工程簡介
6.2施工流程
6.3通風工程主要施工方案及技術要求
6.3.1安裝流程
6.3.2風管支托吊架的安裝
6.3.3風管的安裝
6.3.3風閥的安裝
6.3.4風口的安裝
6.5空調設備安裝
6.5.1新風機.空調器安裝
6.5.2送,排風機安裝
7給排水工程施工方案及技術要求
7.1給排水工程簡介
7.2施工流程
7.4鋼塑復合管安裝工藝
7.4.1運輸及貯存
7.4.2管材與管件的安裝連接
7.4.3管道敷設
7.5衛生器具安裝工藝
8.消防噴淋及消火栓系統施工方案及技術要求
8.1工程簡介
8.2主要施工方案及技術要求
8.2.1管網安裝
8.2.2噴頭安裝
8.2.3水流指示器安裝
8.2.4水力警鈴安裝
8.2.5閥門及其附件的現場檢驗
8.2.6濕式報警閥安裝
8.2.7泵等設備安裝
8.2.8系統試壓及沖洗
8.3合理代建議
9自動報警系統施工方案及技術要求
9.1工程簡介及特點
9.2施工流程
9.3主要施工方案及技術要求
9.3.1布線
9.3.2水災控制器的安裝
9.3.3報警控制器的安裝
9.3.4消防控制設備安裝
9.3.5系統調試
10施工進度計劃
10.1施工進度計劃部署
10.2施工階段劃分
10.3各施工階段主要工作內容
10.4主要進度控制節點
11工期保證措施
11.1科學合理的統籌和決策
11.1.1領導重視,組織保證
11.1.2實行計劃管理與動態管理相結合
11.2施工配合協調
11.3集中力量,抓關鍵工序
11.4優化施工資源
11.4.1確保該工程的施工資金
11.4.2優化施工人員結構
11.4.3優化施工機具配置
11.4.4保證材料的供應
11.5做好檢驗和測試工作
12全過程質量控制及質量保證措施
12.1工程管理目標
12.1.1質量方針
12.1.2質量目標
12.2質量保證體系
12.3質量管理組織機構
12.4質量管理制度
12.4.1項目部管理人員職責
12.4.1.1項目經理職責
12.4.1.2項目技術負責人職責
12.4.1.3專業施工人員的職責
12.4.2文件和技術資料管理
12.4.3采購
12.4.4產品標識和可追溯性
12.5.施工過程質量控制
12.5.1施工準備階段過程控制
12.5.2施工方法控制
12.5.3環境控制
12.5.4施工過程控制
12.5.4.1施工技術,質量交底
12.5.4.2材料控制
12.5.4.3技術評定準則
12.5.4.4 設備的維護,保養,驗證
12.5.4.5關鍵工序
12.5.4.6分項工程檢測
12.6施工工序活動效果的控制
12.6.1 工程工序質量活動控制步驟
12.6.2工程工序質量活動控制要點
12.7質量控制點
12.7.1通風工程質量控制點
12.7.2消防給水安裝工程質量控制點
12.7.3泵類安裝工程質量控制點
12.7.4保溫質量控制點
12.7.5防腐工程質量控制
12.7.6電氣安裝工程質量控制點
12.8成品保護及交工驗收
12.8.1成品保護
12.8.2交工驗收
12.9保證措施
13安全施工保證措施
13.1安全管理目標
13.1.1安全方針
13.1.2安全目標
13.2現場安全管理機構
13.3安全管理制度
13.4安全教育
13.5安全檢查
13.6安全技術保證措施
13.6.1常規施工安全措施
13.6.2施工所需的機電設備的安全事項
14文明施工保證措施

14.1對現場場容管理方面的要求14.2對現場機械管理方面的要求
14.3對現場生活衛生管理方面的要求
14.4環境保護保證措施
14.4.1防大氣污染措施
14.4.2防止水污染措施
14.4.3防噪聲污染措施
15技術及后期服務
CONTENTS
1. Preparation instructions ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
1.1 Purpose The ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
1.2 The preparation according to ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
2. Project Overview ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
2.1 Project Description ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
2.2 Project Characteristics ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3. Project management objectives and project organization ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.1 Project Management Objectives ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.2 Project Organization ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.2.1 Ministry of Construction Project Management System ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.2.2 Project management institutions ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.3 Install project team composed of ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4. Construction preparation ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1 Construction of the general layout ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1.1 Construction of layout principles ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1.2 Construction of electricity. Water ready ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1.3 Construction Layout Description ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.2 Technical Preparation
4.2.1 Handover preparation ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.2.2 Technical Preparation ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Labor resources to prepare 4.3
4.4 Material preparation
4.4.1 Material preparation
4.4.2 Structure (with) no. Products processing to prepare
4.5 Main construction machinery. Testing tool with
5. Electrical engineering construction plan
5.1 Introduction of Electrical Engineering
5.2 Construction Process
5.3 Low Voltage Distribution Equipment Installation Technology
5.3.1 Construction Conditions
5.3.2 Construction of preparation
5.3.3 Equipment check out of the box
5.3.4 Cabinet (set in place to install
Install Process 5.5 cable bridge
5.6 Cabling Technology
5.7 and dark piping technology
5.7.1-ray tube Concealed
5.7.2-ray tube for surface
5.7.2.1 construction procedure
5.7.2.2 out with the construction method of piping
5.8 The electrical installation of lighting technology
5.9 distribution pipe, socket, switch installation process
5.9.1 Distribution box installation
5.9.2 switch socket.
5.10 Electrical testing and commissioning
5.10.1 General requirements
5.10.2 Low-voltage switchgear cabinets and low voltage electrical devices
6, Central air conditioning program and technical requirements of construction
6.1 Brief Introduction of the central air-conditioning
6.2 Construction Process
6.3 Ventilation engineering and technical requirements of the major construction program
6.3.1 Installation Process
6.3.2 Duct Installation Brackets and Hangers
6.3.3 Installation of duct
6.3.3 The air valve installation
6.3.4 Installation of outlet
6.5 Air conditioning installation
6.5.1 The new fan. Air conditioner installation
6.5.2 to send, exhaust fan installation
7 water supply and drainage construction program and technical requirements
7.1 Introduction to the drainage works
7.2 Construction Process
Steel-plastic Composite Pipe Installation Technology 7.4
7.4.1 Transport and storage
7.4.2 Installation of pipes and pipe fittings to connect
7.4.3 pipe laying
7.5 installation process sanitary ware
8. Fire sprinkler and hydrant system construction program and technical requirements
8.1 Project Description
8.2 The main construction program and technical requirements
8.2.1 Pipeline Installation
8.2.2 sprinkler installation
8.2.3 Flow indicator installed
8.2.4 Water alarm installation
8.2.5 Valves and accessories on-site inspection
8.2.6 Wet alarm valve installation
8.2.7 installation of pumps and other equipment
8.2.8 System pressure test and flushing
Reasonable on behalf of the proposed 8.3
9 automatic alarm system construction program and technical requirements
9.1 Project Introduction and Features
9.2 Construction Process
9.3 The main construction program and technical requirements
9.3.1 Cabling
9.3.2 installation of flood control
9.3.3 Installation of alarm controller
9.3.4 Fire control equipment installed
9.3.5 system debugging
10 Construction Schedule
10.1 Construction of the planned deployment schedule
10.2 Construction Stages
10.3 The main content of the construction phase
10.4 The main progress of the control node
11 schedule assurance measures
11.1 a scientific and rational planning and decision-making
11.1.1 leadership attention, organizational guarantee
11.1.2 planned combination of management and dynamic management
11.2 with the coordination of construction
11.3 concentrate, focus on key process
11.4 Optimization of construction resources
11.4.1 ensure that the money works
11.4.2 Optimization of the structure constructors
11.4.3 Optimization of construction equipment configuration
11.4.4 ensure that the supply of materials
11.5 Inspection and testing work well
12 whole process of quality control and quality assurance measures
12.1 The project management objectives
12.1.1 Quality Policy
12.1.2 Quality Target
12.2 Quality Assurance
12.3 Quality Management Organization
12.4 Quality Management System
12.4.1 Project management responsibilities of the Department of
12.4.1.1 Project Manager Responsibilities
12.4.1.2 Project Technical Leader responsibilities
12.4.1.3 Construction of the duty of professional
12.4.2 documentation and technical data management
12.4.3 Procurement
Product identification and traceability 12.4.4
12.5. Construction Quality Control
12.5.1 the construction preparation stage process control
12.5.2 Construction Method of Control
12.5.3 Environmental Control
12.5.4 Construction of process control
12.5.4.1 construction technology, quality cards on the table
12.5.4.2 Material Control
12.5.4.3 Technical evaluation criteria
12.5.4.4 equipment maintenance, maintenance, validation
12.5.4.5 key process
12.5.4.6 Detection of sub-projects
12.6 The effect of construction process control activities
12.6.1 engineering processes and quality control procedures activities
12.6.2 engineering processes and quality control points activities
12.7 Quality Control Points
12.7.1 Ventilation Engineering Quality Control Points
12.7.2 installed Fire Water Quality Control Points
12.7.3 pump installation quality control points
12.7.4 Insulation Quality Control Points
12.7.5 Corrosion Engineering Quality Control
Electrical installation 12.7.6 Quality Control Point
12.8 Completion Acceptance of product protection and
12.8.1 product protection
12.8.2 Completion Acceptance
12.9 assurance measures
Construction to ensure security measures 13
13.1 Safety management objectives
13.1.1 Security Policy
13.1.2 Safety Goals
13.2 on-site security management institutions
13.3 Safety Management System
13.4 Safety Education
13.5 Security Inspection
13.6 Security Technical Assurance Measures
13.6.1 General construction safety measures
13.6.2 Construction of mechanical and electrical equipment required for safety matters
14 Construction to ensure civilized measures
14.1 pairs field site content management requirements
14.2 pairs of field machinery management requirements
14.3 pairs of field life, health management requirements
14.4 Environmental assurance measures
14.4.1 Anti-air pollution measures
14.4.2 Measures to prevent water pollution
14.4.3 Anti-noise pollution measures
15 technical and post-service
 

前往下載