001洗手盆柜、廚柜施工技術交底.pdf

交底內容：
A、施工準備：
2.1  材料及構配件
    2.1.1  廚柜和衛生間洗手盆柜制品由工廠加工成成品，木材制品含水率不得超過12%。加工的框和扇進場時，應核查型號、質量，驗證產品合格證。
    2.1.2  其他材料：防腐劑、插銷、木螺絲、拉手、鎖、碰珠。合頁等，按設計要求或經甲方和設計師確認的品種、規格、型號備購。
    2.2  主要機具：
    2.2.1  電動機具：手電鉆、小臺鋸。
    2.2.2  手用工具、大刨、二刨、小刨、裁口刨、木鋸、扁鏟、木鉆、絲錐、螺絲刀、鋼鋸、鋼水平、鑿子、鋼挫、鋼尺。
    2.3  作業條件。
    2.3.1  結構工程和有關廚柜、洗手盆柜的連體構造已具備安裝壁柜和吊柜的條件，室內已有標高水平線。
    2.3.2  廚柜、洗手盆柜成品已進場，并經驗收。數量、質量、規格、品種無誤。
Cards on the table contents:
A, construction preparation:
2.1 Materials and components and parts
    2.1.1 kitchen cabinets and bathroom vanity cabinets from the factory processed into finished products, wood products shall not exceed 12% moisture content. Processing of the frame and the fan comes into play, should be verified models, quality, verify product certification.
    2.1.2 Other Materials: preservatives, bolt, wood screws, handles, locks, touch beads. Hinge and so on, according to design requirements or Party and designers recognized varieties, specifications, model equipment purchase.
    2.2 Main equipment:
    2.2.1 Motors with: hand drill, a small table saws.
    2.2.2 Hand tools, big plane, two plane, small plane, cut mouth planing, wood saw, flat shovel, wood drill, tap, screwdriver, hacksaw, steel level, chisel, steel fell, steel rule.
    2.3 Operating conditions.
    2.3.1 Structural Engineering and the kitchen cabinets, vanity cabinet piece construction already have installed cabinets and conditions of hanging cabinet, interior elevation of the horizon has been.
    2.3.2 kitchen cabinets, vanity cabinet finished product has been admitted, and the experience received. Quantity, quality, size, variety and correct.
 

前往下載