顆粒砂漿保溫(外飾為貼磚的)施工工藝.doc
進入下載頁
顆粒砂漿保溫(外飾為貼磚的)施工工藝
一、作業條件:
1、基層墻體的質量必須符合相關質量驗收規范和標準要求,主體結構已驗收,并辦理四方驗收手續。
2、腳手架和外用電梯安裝完畢并通過驗收。
3、外門窗通過驗收并有相應成品保護措施。
4、外陽臺部位電器暗管,接線盒安裝完畢,外墻雨水管卡預埋完畢。
5、FIRST B.M體系正常施工溫度5℃以上,風力超過5級或中雨以上天氣不得施工。施工完畢后應防止陽光直曬。
二、主要材料與施工工具:
Particles mortar insulation (exterior for the tiling of the) construction technology
1, operating conditions:
1, the quality of primary wall must comply with the relevant norms and standards of quality acceptance, the main structure has been acceptance and acceptance procedures for handling the Quartet.
2, scaffolding and elevator installed by external inspection.
3, external doors and windows finished products through inspection and have the corresponding protection measures.
4, outside the balcony of electrical underground pipe, junction boxes installed, external rainwater pipes embedded cards completed.
5, FIRST BM system in normal working temperature of 5 ℃, wind more than 5 or moderate rain over the weather may not construction. After construction should prevent direct sunlight.
Second, the major materials and construction tools:
