鋼木門窗安裝工程安全作業交底.doc

內容摘要：
1、 進入施工現場人人都必須遵守信達建筑工程公司的各項規章制度和紀律。
2、 操作者應經常檢查所用工具是否牢固，防止脫柄傷人。
3、 安裝上層窗扇時不要向下亂扔東西，工作時注意腳要踩穩，不要向下看。
4、 搬運鋼門窗時應輕放，不得使用木料穿入框內吊運至操作位置。
5、 鋼門窗不得平放，應該豎立，其豎立坡度不大于20度，并不準人字型堆放。
6、 不準腳踩窗扇芯子，或在窗扇芯子放置腳手板和懸吊重物。
7、 使用木工機械，禁止戴手套，操作時必須集中思想，認真操作，不得與他人談笑。
8、 鋸刨木料時推進速度不能太快，本節應放在推進方向的前面；不能刨過短木料及過薄小條子等材料。
9、 木工機械的基座必須穩固，部件必須齊全，機械的轉動和危險部位必須按規定安裝防護裝置。
10、不準任意換粗保險絲，特別對機械的刀盤部分要嚴格檢查，刀盤螺絲必須旋緊，以防刀片飛出傷人。
11、木料機械必須有專人負責，操作人員必須熟悉該機械性能，熟悉操作技術做到持證上崗。
12、嚴禁機械無人負責或隨便動用，木工機械使用必須實施二級漏電保護，用完時應切斷電源并將開關箱關門上鎖。
13、木工車間、木庫、木料堆場嚴
Abstract:
1, into the construction site that everyone must abide by the letter of the rules and regulations up to construction companies and discipline.
2, the operator should always check whether the firm used tools, to prevent the removal handle wounding.
3 Do not install the upper sash down to throw things at work to pay attention to step foot stability, not to look down.
4, removal of steel doors and windows should be light up, can not penetrate the wood box used to operate the lifting position.
5, steel doors and windows can not flat, it should be erected, the erection is not greater than 20 degrees slope, and ban the font stack.
6 foot window sash closed cores, or cores placed in the window sash suspended scaffold boards and heavy.
7, the use of woodworking machinery, banned from wearing gloves, the operation must focus on thought, serious action, not talk and laugh with others.
8, saw the advancing speed when planing wood can not be too fast, this section should be placed in front of the advancing direction; can not dig too short and too thin small strips of wood and other materials.
9, the base must be solid woodworking machinery, parts must be complete rotation and dangerous parts of machinery must be installed in accordance with the provisions of protection devices.
10, not allowed to arbitrarily change crude fuse, in particular, part of the machinery necessary to strictly inspect the cutter, cutter screw must be tightened to prevent the blade flying out of wounding.
11, wood machinery must be responsible, the operator must be familiar with the mechanical properties, be familiar with the operation of technical certificates.
12, no one is responsible for non-mechanical or casual use, woodworking machinery used to implement two leakage protection, used to cut off power and switch boxes should be locked shut.
13, a carpentry workshop, wood library, timber yard Yan
 

前往下載