中小型機械操作工安全技術交底.doc
進入下載頁
中小型機械操作工安全技術交底
1. 現場施工機械必須按施工平面圖布置,如須移動,必須經現場施工負責人同意方可移動。
2. .現場機械安裝應穩固,帶有膠輪胎的機械應將輪胎拆下并墊離地面,保養好。按規定搭設操作平臺、防護欄桿,保證進。出料安全,整機應搭設安全可靠的操作棚。
3. .機械安裝或檢修完畢,必須經試運轉正常后,辦理交接班簽證手續后方準使用。
4. .一切機械、電器設備的金屬外殼和行車軌道必須接零、接地線,電阻不大于10歐。在同一供電系統中不準有的設備接零有的設備接地。
5. .接新的用電規程JGJ46-88規定,所有的施工機械都應安裝漏電保護器。特別是移動型機具,不安裝漏電保護器不得使用。
6. .實行一機一閘制,所有機械都應設獨立的開關箱,箱內不得存放什物。開關距所控設備水平距離不宜超過3m。
7. .機械操作人員要事先經過培訓,三機操作工要持證上崗。嚴禁違章作業,嚴格執行操作規程,實行定機定人定責任制。
8. .操作工應做到“四懂”“三會”即,懂構造、原理、性能、用途、會操作、會維修保養、會排除故障。
9. .工作前必須按規定穿戴好防護用品,操作旋轉機庫嚴禁戴手套。女工要戴女工帽,長發不得外露。
.使用移動型機具,操作人員應嚴格執行穿絕緣鞋戴絕緣手套的規
Small Plant Operator Safety Technology Details
1. The scene of construction machinery and construction plan must be arranged as to be mobile, construction-site person in charge must be agreed before move.
2.. On-site mechanical installation should be firm, with mechanical rubber tires and mats should be removed from the ground tires, maintenance good. Erection of platforms required, protective railings, to ensure progress. The material security, the whole erection of safe and reliable operation should be shed.
3.. Mechanical installation or maintenance is completed, must be approved by the normal test run, the process behind the potential use of shift change visa.
4.. All the machinery, electrical equipment, metal case and driving tracks to take zero, grounding wire, the resistance is not more than 10 euro. In the same power supply system, some devices are not allowed to take some equipment ground zero.
5.. Then the new electricity regulations JGJ46-88, all of the construction machinery should be installed with leakage protector. Particular type of mobile equipment, earth leakage protection devices are not prohibited.
6.. A gate to implement a machine system, all machinery should be set up independent switch box, box may not be kept odds and ends. Switch horizontal distance from the control equipment should not exceed 3m.
7.. Machine operators to pre-trained, three machine operators to be certified. Prohibited illegal operation, strict operational rules, is scheduled to implement the responsibility system man-machine set.
8.. Operatives should be "four to understand" the "three will" that is, knowledge of the structure, principle, performance, use, operate, repair and maintenance will be troubleshooting.
9.. The work of the former must wear good protective equipment required to operate rotating hangar forbidden to wear gloves. Female workers to wear hats, long hair and not exposed.
. Using a mobile-type equipment, operating personnel should strictly enforce the wearing insulated gloves wearing regulation shoes
